Skip to content
Contact Us
Products
Masonry Systems
Anchors & Ties
Veneer Anchors
Stone Anchors
Masonry to Concrete
Masonry to Masonry
Masonry to Steel
Masonry to Steel Stud
Flex-O-Lok® Ties
Adjustable ties are recommended as a veneer or cavity wall tie to connect to structural steel.
Gripstay Anchors & Channels
Partition Top Anchors
Joint Reinforcement
Joint reinforcement is installed in horizontal mortar joints of masonry for shrinkage stress control. For joint reinforcement to effectively distribute stress it must be adequately bonded through the mortar so that the masonry and reinforcement act together. Table A (page 2) shows wire size and properties for steel joint reinforcement material. Applications of Joint Reinforcement Reinforced Masonry – Joint reinforcement either alone or in conjunction with wider-spaced bond beams contributes to the area of steel requirements in reinforced masonry. Wall Intersections – Partition-Lok® and Corner-Lok® are prefabricated pieces of corner and tee joint reinforcement used to join masonry walls at intersections and corners. Stress Distribution – Continuous joint reinforcement is used to distribute stress concentrations that occur above and below windows, or where wall sections are reduced because of embedded columns, and below concentrated loads such as beams and slabs. An important application of stress distribution joint reinforcement is to safeguard the integrity of masonry walls from unexpected and difficult-to-design-for events such as industrial explosions and accidents.
Adjustable Reinforcement Systems
Ladder Joint Reinforcement
Truss Joint Reinforcement
Rebar Positioners
Control Joints
Control joint products are used to reduce restraint and permit longitudinal movement. They are placed where cracking is likely to occur due to excessive tensile stress.
Masonry Accessories
Adjustable Rubble Stone Systems
Concrete Inserts
BLOK-LOK Concrete Wedge inserts are embedded into concrete slabs. Nail holes in the back of the insert allow easy nailing to forms. When the forms are stripped, the open face of the insert is flush with the concrete. The beveled head of the askew head bolt engages the internal wedge shape of the insert and produces an automatic tightening action when a load is placed on it.
Control Joints
Control joint products are used to reduce restraint and permit longitudinal movement. They are placed where cracking is likely to occur due to excessive tensile stress.
Rebar Positioners
Flashing Systems
Flashing
Flashing Accessories
Repair & Restoration Systems
Brick-Lok®
Panel-Lok®
Spira-Lok®
Torq-Lok®
Air Barrier Systems
Air Barriers
Air Barrier Accessories
Search for:
Menu
Close Menu
Products
Masonry Systems
Anchors & Ties
Veneer Anchors
Stone Anchors
Masonry to Concrete
Masonry to Masonry
Masonry to Steel
Masonry to Steel Stud
Flex-O-Lok® Ties
Adjustable ties are recommended as a veneer or cavity wall tie to connect to structural steel.
Gripstay Anchors & Channels
Partition Top Anchors
Joint Reinforcement
Joint reinforcement is installed in horizontal mortar joints of masonry for shrinkage stress control. For joint reinforcement to effectively distribute stress it must be adequately bonded through the mortar so that the masonry and reinforcement act together. Table A (page 2) shows wire size and properties for steel joint reinforcement material. Applications of Joint Reinforcement Reinforced Masonry – Joint reinforcement either alone or in conjunction with wider-spaced bond beams contributes to the area of steel requirements in reinforced masonry. Wall Intersections – Partition-Lok® and Corner-Lok® are prefabricated pieces of corner and tee joint reinforcement used to join masonry walls at intersections and corners. Stress Distribution – Continuous joint reinforcement is used to distribute stress concentrations that occur above and below windows, or where wall sections are reduced because of embedded columns, and below concentrated loads such as beams and slabs. An important application of stress distribution joint reinforcement is to safeguard the integrity of masonry walls from unexpected and difficult-to-design-for events such as industrial explosions and accidents.
Adjustable Reinforcement Systems
Ladder Joint Reinforcement
Truss Joint Reinforcement
Rebar Positioners
Control Joints
Control joint products are used to reduce restraint and permit longitudinal movement. They are placed where cracking is likely to occur due to excessive tensile stress.
Masonry Accessories
Adjustable Rubble Stone Systems
Concrete Inserts
BLOK-LOK Concrete Wedge inserts are embedded into concrete slabs. Nail holes in the back of the insert allow easy nailing to forms. When the forms are stripped, the open face of the insert is flush with the concrete. The beveled head of the askew head bolt engages the internal wedge shape of the insert and produces an automatic tightening action when a load is placed on it.
Control Joints
Control joint products are used to reduce restraint and permit longitudinal movement. They are placed where cracking is likely to occur due to excessive tensile stress.
Rebar Positioners
Flashing Systems
Flashing
Flashing Accessories
Repair & Restoration Systems
Brick-Lok®
Panel-Lok®
Spira-Lok®
Torq-Lok®
Air Barrier Systems
Air Barriers
Air Barrier Accessories
Search for:
Contact Us
Category: Panel-Lok®
Products
/
Repair & Restoration Systems
/ Panel-Lok®
Filter
Default sorting
Sort by popularity
Sort by latest
Sort by price: low to high
Sort by price: high to low
Default sorting
View:
16
32
All
Quick View
Quick View
Panel-Lok®
,
Repair & Restoration Systems
Panel-Lok®
Mechanical Restraining Anchors for Re-Anchoring Stone Panel Veneers
Read more
Close Menu
Product categories
Air Barrier Systems
Air Barrier Accessories
Air Barriers
Flashing Systems
Flashing
Flashing Accessories
Masonry Systems
Adjustable Rubble Stone Systems
Anchors & Ties
Flex-O-Lok® Ties
Gripstay Anchors & Channels
Masonry to Concrete
Masonry to Masonry
Masonry to Steel
Masonry to Steel Stud
Partition Top Anchors
Stone Anchors
Veneer Anchors
Concrete Inserts
Control Joints
Joint Reinforcement
Adjustable Reinforcement Systems
Ladder Joint Reinforcement
Truss Joint Reinforcement
Masonry Accessories
Rebar Positioners
Products
Repair & Restoration Systems
Brick-Lok®
Panel-Lok®
Spira-Lok®
Torq-Lok®
Uncategorized
×
